The perfect equipment for:
-
Urban
-
Infrastructure
Полное описание
-->
ENGINE
Engine FPT
Engine Model S8000
Emission compliant BS-III
Engine Displacement (L) 3.9
Engine Air Intake Type Water Cooled
Engine Gross power @ 2200rpm 3 7 kW (49.5 hp)
Engine Maximum Torque (Nm) 252.2 Nm@ 1200 rpm
LOADER GENERAL DIMENSIONS
Dump height (m) 2.72
Load over height (m) 3.30
Hinge pin height (m) 3.58
Hinge pin forward reach (m) 0.24
Reach at ground (m) 1.98
Max. reach at full height (m) 1.19 (2WD)
Max. reach at full height-bucket dumped (m) 0.76
Below ground level-dig depth (m) 0.11
Rollback at ground (deg.) 33
Dump angle (deg.) 45
Bucket capacity std. (m3) 1.1
Bucket breakout force (kgf/ kN) 5275/ 51.73
Loader arm breakout force (kgf/ kN) 5110/ 50.11
Max. Pay load (kg) 1925
Maximum lifting capacity (kg) @ max height 3425
BACKHOE GENERAL DIMENSIONS
Dipper configuration 14 Feet
Max. dig depth (m) 4.40
Reach ground level to swing center (m) 5.63
Reach-ground level to rear wheel center (m) 6.95
Reach at full height to slew center (m) 2.15
Max. working height (m) 5.49
Max. load over height (m) 3.64
Bucket capacity (m³) 0.26
Bucket rotation (deg.) 185
Bucket breakout force (kgf/ kN) 5000/ 49.03
Dipper tear out force (kgf/ kN) 2751/ 26.98
Max. lift capacity (kg) 1417
Safe working load (kg) @3.2m radius 1300
OVERALL DIMENSIONS AND WEIGHTS
Max Operating Weight (Kg) 7610
Transport Length (m) 5.88
Width over stabilizer (m) 2.27
Width over bucket (m) 2.28
Track width- Rear (m) 1.70
Track width- Front (m) 1.88
Wheelbase (m) 2.18
Minimum Ground clearance (m) 0.38
Height to top of cabin 2.88
Overall transport height (m) 3.85
HYDRAULIC SYSTEM
System type Open Center Load Sensing system
Pump type Axial Piston with Electric Displacement Control
Pump Flow (lpm) 119
System relief pressure (bar) 240
SERVICE CAPACITIES
Engine oil (L) – System 8.6
Rear Axle (L) 17.1
Hydraulic oil (L) – System 100
Hydraulic oil (L) – Replacement/Interval* 48/4000 hr.
Transmission Oil Capacity (L) - System 18
Fuel tank (L) 129
Coolant (L) 20
POWER TRAIN
Powertrain type 4F-4R Power Shuttle Synchromesh Transmission
Transmission Make and Model CARRARO 2WD TLB1
AXLE
Rear CARRARO 28.32M
Front CNH PS1300 (2WD)
Front Axle Oscillation ±21 degree(2WD)
STEERING
Type Power Steering
System pressure(Bar) 140
teering Unit Displacement (cc/rev) 125
Turning circle diameter outside bucket – Braked (m) 9.2
Turning circle diameter outside bucket – Not - braked (m) 11.1
BRAKES
Service Hydraulic foot operated, 2 disc per side
Parking Mechanically actuated caliper type brake pack on Rear axle input shaft
TYRE
HD Tyre-Rear-Optional 14x24- 12PR
Standard Tyre-Front 9x16 -16PR
Standard Tyre-Rear 16.9x28 -12PR
ELECTRICAL SYSTEM
Battery 12 volts, 110 Ah
TRAVEL SPEED
Forward (1st/2nd/3rd/4th) (km/hr) 5.0/7.9/16.9/32.4
Reverse (1st/2nd/3rd/4th) (km/hr) 5.9/9.4/19.8/NR
OPTIONAL EQUIPMENT
Backhoe Bucket (m³) 0.08, 0.12, 0.18
Counterweight (kg) 211
Tyre Heavy Duty 14x25 - 12PR/20PR